How to make insulation on the roof of residential house?
The shortages of below building floor.
1. light body floor: winter cold summer heat, air conditioning power consumption, floor slab thermal expansion and contraction is easy to crack.
2. cement board, tile insulation: poor insulation effect, heavy weight, unsightly, short life, low cost.
3. color steel plate insulation: better insulation effect, large rain and sound, rust life is short, the cost is above 100 RMB / m2.
4. foam plastic plate insulation: good insulation effect, the lower layer of soft and easy to empty drum, not easy to accumulate water with the floor, short life, high cost.
The advantages of Gauros thermal insulation material.
Gauros brand thermal insulation mortar: vitrified micro-beads lightweight insulation mortar, is a natural high-quality high-temperature lightweight materials for the aggregate, optimized combination of a variety of inorganic modified materials and curing materials, using advanced Technology, produced by factory production. Can be mixed with other insulation materials and waterproof materials. The invention solves the problem that the polystyrene foam particles and the cement are difficult to be bonded, overcomes the shortcomings of the above-mentioned heat insulation technology, and has a good trial effect on the roof of the house, and can be used as a heat insulation layer, a wall, a tile, and the like.
More good performance is as follows:
1. Insulation and energy saving effect is remarkable:
Because of its small thermal conductivity, large heat storage coefficient, good thermal insulation effect. This product is used for the insulation and energy saving effect of the iron tile surface, the floor surface and the inner and outer walls. The heat insulation effect will not change with time. According to the Zhanjiang Energy Conservation Center, the building uses thermal insulation mortar. After the slab, the temperature difference of the floor was 10.9 °C, the temperature drop was 27.88%, the temperature difference of the indoor top surface was 7.4 °C, and the temperature drop was 20.22%.
2. Thermal insulation waterproof three-in-one:
Regardless of whether it is a wall or a floor, use this product to add a certain proportion of water-repellent agent during the mixing process. After condensing, it is insulated and waterproof, one step at a time.
3. Thermal insulation and fire resistance are good:
In recent years, many local building fire accidents in China have been caused by the fact that the wall insulation materials are not fireproof and the losses are heavy. The products produced by our factory have reached Class A fire protection standards, which are not only fireproof but also resistant to high temperatures.
4. Thermal insulation has a good protection for the building structure:
As we all know, the law of thermal expansion and contraction of an object cannot be changed. The only way is to reduce the temperature of the object from external temperature. That is, the surface of the object should be insulated to reduce the thermal expansion and contraction. The structure of the building is especially The floor and wall have long sunshine hours. If the heat insulation effect is good, the wall structure is not affected by thermal expansion and contraction, and it is not easy to cause cracking and aging.
5. Thermal insulation has a long service life:
The nature of the product is soft in the middle, and its compressive strength, bond strength, shear bond strength, shrinkage rate and other indicators are in line with national standards, and some indicators are superior to national standards. The service life is synchronized with the main structure, one-time use and long-term insulation.
6. Insulation and breathability:
In the past, the traditional floor insulation was made of ordinary red bricks. The square bricks were more common. It is obvious that red bricks and bricks are stored quickly, and the heat is quickly transferred to the floor. At night, the floor and The bricks in the insulation layer have a lot of heat energy that can't be released slowly, and the indoor stability is high until late at night. In recent years, some users have used polystyrene foam for floor insulation, although the insulation effect is also good, but the material is slow and not fireproof. With the products produced by our factory, the heat insulation effect is good, the heat dissipation is fast, and the ventilation performance is good. You can enjoy the comfort of winter and cool summer.
7. Thermal insulation construction is simple and fast, green and environmentally friendly:
After the products are transported to the construction site in bags, they do not need to be added with any materials. Only add water and stir them evenly, and use them to achieve smoothing and light collection at one time. The construction speed is high and efficient; and it is non-toxic, odorless and non-radioactive, and is a truly environmentally friendly material.
8. Thermal insulation cost-effective:
The products that can be selected by large and small customers are good products. Our factory is based on the principle of benefiting the people. In recent years, raw materials and labor have been increasing, but our factory is constantly innovating with the advantages of technology and production capacity, and the price is always the same as the market. The product is 25% lower.
Scope of application of Gauros thermal insulation material.
1. It can be used for fire and heat insulation of walls inside and outside walls, floors, basements, garages, stairs, corridors, fire exits, etc.
2. It can be used for reinforced concrete, block, sintered brick, non-sintered brick and light wall material of multi-storey and high-rise buildings.
3. It can be used for heat insulation and heat preservation projects of simple buildings such as dormitories, factory buildings and farms with various tile structures such as metal.
4. Insulation engineering that can be used for the renovation of old buildings.
For more info, kindly contact info@gauros.com for support.
